Construction Cap (Safety Helmet)
Industrial-grade hard hat for head protection on construction sites.
- HDPE shell
- 6-point ratchet suspension
- IS 2925 certified
rentsale
View Gallery Our Services
A complete catalogue of shuttering, scaffolding, and construction equipment - available on rent or for wholesale purchase.
Complete Shuttering & Scaffolding Solutions
From small residential slabs to multi-storey commercial projects - we have the right materials and the right expertise.
Construction Safety Shoes
Steel-toe safety boots with oil-resistant soles for site protection.
- Steel toe cap (200J impact)
- Puncture-proof midsole
- Genuine leather upper
rentsale
View Gallery 
Construction Jacket (High-Visibility Safety Vest)
Fluorescent reflective safety jacket for high visibility on construction sites.
- Fluorescent polyester mesh
- 2-inch reflective tape (360°)
- Breathable & lightweight
rentsale
View Gallery 
Construction Safety Belt (Full Body Harness)
Full-body safety harness with double lanyard for fall protection at height.
- High-tenacity polyester webbing
- Forged steel D-rings
- Double lanyard with shock absorber
rentsale
View Gallery 
U Jack (U-Head Jack / Fork Head)
Adjustable U-head jack for supporting horizontal beams in formwork systems.
- Mild steel construction
- 600 mm adjustment range
- 3–5 tonne load capacity
rentsale
View Gallery 
Base Jack (Base Plate Jack)
Adjustable base jack for leveling scaffolding and props on uneven ground.
- 150×150 mm base plate
- 600 mm height adjustment
- 38 mm threaded stem
rentsale
View Gallery 
JCB Machine (Backhoe Loader)
Versatile backhoe loader for excavation, loading, and material handling on construction sites.
- Dual-function (loader + excavator)
- 75–100 HP diesel engine
- 4WD capability
rent
View Gallery 
Tie Rod (Shuttering Tie Rod)
Threaded tie rod for holding shuttering plates together during concrete pouring.
- Cold-drawn mild steel
- Rolled threads on both ends
- 12 mm & 15 mm diameter options
rentsale
View Gallery 
Gugu Nut (Wing Nut / Butterfly Nut)
Cast-iron wing nut for quick tightening of shuttering tie rods without tools.
- Ductile cast iron
- Two-wing design for tool-free operation
- Quick install & removal
rentsale
View Gallery 
Shikanja (L-Bolt / Anchor Bolt)
L-shaped anchor bolts for securing formwork panels and structural connections.
- High-tensile mild steel
- L-shaped for hooking/anchoring
- Threaded end for nut fastening
rentsale
View Gallery 
Shuttering Plywood
Film-faced waterproof plywood sheets for smooth concrete finishes in formwork.
- Hardwood veneer with phenolic resin
- Film-faced both sides
- BWP (Boiling Water Proof) grade
rentsale
View Gallery 
Wooden Beat (Wooden Batten / Plank)
Seasoned wooden battens and planks for formwork support and beam centering.
- Seasoned sal wood / pine
- Multiple cross-sections (2×3, 3×4, 4×4 inches)
- 6–12 ft lengths
rentsale
View Gallery 
Jack Props (Adjustable Steel Props / Acro Props)
Height-adjustable steel props for supporting slabs, beams, and formwork during curing.
- ERW steel tube construction
- Telescopic height adjustment
- Pin-and-collar locking
rentsale
View Gallery 
Column Clamp
Adjustable steel clamp for holding column formwork panels tightly during concrete pouring.
- Heavy-gauge mild steel
- Adjustable size (9×9 to 30×30 inches)
- Bolt-and-nut tightening
rentsale
View Gallery 
Scaffolding Pipe Clamp (Scaffold Coupler)
Drop-forged couplers for joining scaffolding pipes at right angles or swivel connections.
- Drop-forged steel
- Right-angle / swivel / sleeve types
- Fits 48.3 mm OD pipes
rentsale
View Gallery 
Wing Nuts (Formwork Wing Nuts)
Pressed steel wing nuts for fast tightening of tie rods in shuttering systems.
- Pressed/stamped steel
- Lightweight & economical
- Tool-free hand tightening
rentsale
View Gallery 
Chain Pulley (Chain Pulley Block / Chain Hoist)
Manual chain pulley block for lifting heavy construction materials to height.
- Alloy steel load chain
- Heat-treated precision gears
- 0.5–10 tonne capacity
rentsale
View Gallery 
Roller Compactor (Vibratory Road Roller)
Ride-on vibratory roller compactor for soil, gravel, and asphalt compaction.
- Vibratory compaction mechanism
- 1–12 tonne weight range
- Diesel-powered hydrostatic drive
rent
View Gallery 
Jhula Lift (Suspended Platform / Hanging Scaffold Cradle)
Motorized suspended platform for exterior plastering, painting, and facade work at height.
- Electric motor-powered hoists
- 2/4/6 m platform lengths
- 500 kg safe working load (dual motor)
rent
View Gallery 
Saria Folding Machine (Rebar Bending Machine)
Electric/manual rebar bending machine for shaping TMT bars for RCC construction.
- Bends TMT bars 6–32 mm diameter
- 0°–180° adjustable bend angle
- Manual / semi-auto / electric models
rentsale
View Gallery 
Ajax Fiori Self Loader (Self-Loading Concrete Mixer)
Self-loading mobile concrete mixer that loads, mixes, transports, and pours concrete independently.
- 4-in-1: load + mix + transport + pour
- 1/2.5/4 m³ drum capacity
- Electronic weigh batching
rent
View Gallery 
Iron Garter (Iron Girder / Steel I-Beam)
Structural steel I-beams for heavy load-bearing in formwork and construction.
- IS 2062 Grade E250 steel
- I-shaped cross-section
- ISMB sizes 100–600 mm
rentsale
View Gallery 
Shuttering Plate (Steel Shuttering Plate)
Heavy-duty steel plates for concrete formwork in all standard sizes.
- High-grade MS steel (2.5–3 mm)
- Welded edge channels
- Pre-drilled tie rod holes
rentsale
View Gallery Monkey Lift (Material Hoist / Builder's Hoist)
Tower-mounted material hoist for lifting bricks, concrete, and supplies to upper floors.
- 3–5 HP electric winch motor
- 200–500 kg lifting capacity
- 15–30 m/min lift speed
rent
View Gallery Mixture Machine (Concrete Mixer)
Portable drum-type concrete mixer for on-site mixing of cement, sand, and aggregate.
- 5–10 HP diesel / electric motor
- 5/7 to 12/8 cft drum capacity
- Tilting drum with mixing blades
rentsale
View Gallery Column Box (Steel Column Formwork Box)
Pre-fabricated steel column formwork box for fast and precise column casting.
- 2.5–3 mm MS steel with angle-iron
- 4-panel interlocking design
- Standard sizes 9×9 to 18×18 inches
rentsale
View Gallery 
Pipe (Scaffolding Pipe / GI Pipe)
Galvanized iron scaffolding pipes for building temporary work platforms and support structures.
- ERW mild steel with GI coating
- 48.3 mm OD (NB 40 mm)
- 2.5–3.2 mm wall thickness
rentsale
View Gallery 
Concrete Block Testing (Cube Testing / Compression Test)
On-site and lab concrete cube testing service for verifying compressive strength compliance.
- 150×150×150 mm standard cube molds
- 7-day & 28-day testing
- Compression testing machine (CTM)
rentsale
View Gallery